advertisement
| February
17th - 19th
Show Times
Fri, Feb. 17th
Noon - 9 pm
Sat, Feb. 18th
10 am - 9 pm
Sun, Feb. 19th
10 am - 5 pm
Location
Seagate Convention Centre
Downtown Toledo, OH
Tickets
Adults $8 • Seniors $7
Discount tickets available at Toledo area Andersons
|
|
|
Easy Faucet Installation
While many consumers want to infuse their kitchens and baths with more style, they don’t want to break the bank doing so. Manufacturers now offer a full line of stylish products at an affordable price that are easy to maintain and that offer dependability.
Follow these simple steps for faucet installation, and you can have a new look in your kitchen or bath in no time:
Allow plenty of time for faucet installation. Don’t rush yourself.
Before you begin, assemble the appropriate tools listed on the installation sheet included in your faucet box.
Keep in mind that removing your old faucet may be the toughest part of the job. Spraying a little penetrating oil on the old tail piece mounting nuts and supply-tube coupling nuts 24 hours in advance can make that task that much easier.
Lay a towel in the sink during your installation to avoid scratches and to avoid dropping any parts or such down the sink.
Shut off the water supplies from the valves located under your sink, then turn on the faucet to release pressure.
Disconnect the tubes attached to the water supply valves. You may need to use a tube cutter if the water supply pipes are soldered.
Loosen and remove the old faucet and all faucet parts from the sink. You will likely need to use a basin wrench, plus a little extra muscle power.
Thoroughly clean the sink and counter area where the existing faucet was removed before inserting your new faucet.
Follow the step-by-step instructions provided with your new faucet to properly install the product.
After the faucet is installed, don’t forget to remove the aerator, and turn on the hot and cold water supplies for one minute to flush the water lines. This will remove debris that could cause damage to internal parts.
|
|
